UP mini 2 User Manual

Update 3D model button. This button will convert the modified picture on the left to
a 3D rendering on the right.
Click OK button to place the 3D render onto the 3D printing interface, ready for print-
ing.
Convert Picture Into 3D Model 2-2
48

UP mini 2 Specifications

General

Build Volume	120 x 120 x 120 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Print Material	ABS, PLA
Connectivity	USB, Wi-Fi
Heated Bed	Yes
Enclosure	Yes
Touchscreen	Yes
Print Technology	FDM (Fused Deposition Modeling)
Print Speed	Up to 100 mm/s
Power Requirements	100-240V, 50-60Hz
Weight	8 kg