UP mini 2 User Manual

Air Filtration Unit
HEPA-Filter
Front View
Turn anti-clockwise to
open the cap.
Printer Maintenance - Air Filter Replacement
It is recommmended to change the HEPA filter in the filtration unit for every 300 hours
of usage or 6 months.
50

UP mini 2 Specifications

General

Build Volume	120 x 120 x 120 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Print Material	ABS, PLA
Connectivity	USB, Wi-Fi
Heated Bed	Yes
Enclosure	Yes
Touchscreen	Yes
Print Technology	FDM (Fused Deposition Modeling)
Print Speed	Up to 100 mm/s
Power Requirements	100-240V, 50-60Hz
Weight	8 kg