Need help?Do you have a question about the UP mini 2 and is the answer not in the manual?
General| Build Volume | 120 x 120 x 120 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Print Material | ABS, PLA |
| Connectivity | USB, Wi-Fi |
| Heated Bed | Yes |
| Enclosure | Yes |
| Touchscreen | Yes |
| Print Technology | FDM (Fused Deposition Modeling) |
| Print Speed | Up to 100 mm/s |
| Power Requirements | 100-240V, 50-60Hz |
| Weight | 8 kg |
To Previous Page
