Foreword
LX 31/41 Work Platform i
i
Introduction
HOW TO USE THIS MANUAL
This manual is divided into 7 sections. The right hand pages
of each section is marked with a black tab that lines up
with one of the thumb index tabs on the right side of this
page. You can quickly find each section without looking
through the table of contents which follows this page. The
section number printed at the top corner of each page can
also be used as a quick reference guide.
SPECIAL INFORMATION
Indicates the hazard or unsafe practice will
result in severe injury or death.
Indicates the hazard or unsafe practice
could result in severe injury or death.
Indicates the hazard or unsafe practice could
result in minor injury or property damage.
NOTES: Give helpful information.
WORKSHOP PROCEDURES
CAUTION: Detailed descriptions of standard workshop
procedures, safety principles and service operations are
not included. Please note that this manual does contain
warnings and cautions against some specific service
methods which could cause personal injury, or could
damage a machine or make it unsafe. Please understand
that these warnings cannot cover all conceivable ways in
which service, whether or not recommended by Up-
Right, Inc., might be done, or of the possible hazardous
consequences of each conceivable way, nor could
UpRight Inc. investigate all such ways. Anyone using
service procedures or tools, whether or not recom-
mended by UpRight Inc., must satisfy themselves
thoroughly that neither personal safety nor machine
safety will be jeopardized.
All information contained in this manual is based on the
latest product information available at the time of printing.
We reserve the right to make changes at any time without
notice. No part of this publication may be reproduced,
stored in retrieval system, or transmitted, in any form by
any means, electronic, mechanical, photocopying, record-
ing, or otherwise, without the prior written permission of
the publisher. This includes text, figures and tables.
1.0
2.0
3.0
4.0
5.0
6.0
7.0
Introduction &
Specifications
General description and machine specifications.
Machine Preparation
Information on preparation for use & shipment,
forklifting, transporting and storage.
Operation
Operating instructions and safety rules.
Maintenance
Preventative maintenance and service information.
Troubleshooting
Causes and solutions to typical problems.
Schematics
Schematics and valve block diagram with
description and location of components.
Illustrated Parts
Breakdown
Complete parts lists with illustrations.
To Next Page
Loading...
Need help?
General
