To Next PageTo Next Page
Need help?Do you have a question about the Upright AB38 and is the answer not in the manual?
General| Brand | Upright |
|---|---|
| Model | AB38 |
| Category | Lifting Systems |
| Language | English |
Specifies the intended applications and prohibited uses of the aerial work platform.
Emphasizes the non-insulated nature of the platform and the need for electrical safety.
Identifies and describes the main parts of the AB38 Bi-Energy aerial work platform.
Specifies the maximum load and number of occupants allowed on the platform.
Defines the maximum allowable manual force applied to external objects.
Explains the function of the overload alarm system and fault codes.
Relates wind speeds to ground conditions and operational limits.
Details the controls located on the platform's upper control station.
Details the controls located on the machine's lower control station.
Details the step-by-step procedure for performing the daily safety inspection.
Details the steps for inspecting the machine's systems and functions.
Emphasizes completing inspections and operator training before use.
Explains the procedures for raising and lowering the platform.
Details the process for rotating the platform.
Explains how to extend and retract the telescopic boom.
Describes how to adjust the cage's floor angle.
Outlines the procedure for starting the engine.
Explains how to manually lower the platform in an emergency.
Provides daily shutdown and securing procedures.
Instructions for lifting the machine using a crane.
Guidelines for transporting the machine with a forklift.
Steps for securing the machine onto a truck for transport.
Details how to check and maintain the hydraulic fluid level.
Covers daily checks, fluid levels, and cleaning of batteries.
Provides instructions and safety warnings for charging the batteries.
Emphasizes preventative maintenance and safety during service.
Lists and illustrates all decals for the AB38 Bi-Energy model.
Presents specifications in both metric and imperial units.
Details specifications for various components like hydraulic systems, tires, and engine.
Provides a detailed list of parts and their corresponding part numbers for the general assembly.
Identifies engine and alternator components and their part numbers.
Details how rectifiers are wired in series for the alternator.
