To Next Page
D
Dr. Sarah RiveraJul 27, 2025
What to do if Upright SL20 has a faulty component?
- CCharles SalasJul 27, 2025
If you find a faulty component in your Upright Lifting Systems, the suggested solution is to repair or replace it.
What to do if Upright SL20 has a faulty component?
If you find a faulty component in your Upright Lifting Systems, the suggested solution is to repair or replace it.
What to do if Upright Lifting Systems is not operating correctly from both platform and chassis controls?
If your Upright Lifting Systems is not operating correctly from both platform controls and chassis controls, perform a full function test from both locations. Make a note of all functions that are not working as they should.
What to do if functions are not functioning correctly in Upright SL20?
If some functions in your Upright Lifting Systems aren't working correctly, use the troubleshooting guide to identify which components are common to all the circuits that are malfunctioning.
What to do if components common to all circuits are not functioning correctly in Upright SL20 Lifting Systems?
If the components common to all circuits in your Upright Lifting Systems are not functioning correctly, test these components. Remember to inspect the wires and terminals between the components you suspect are faulty. Also, make sure to check the connections to the battery negative.
How to verify the repair of components in Upright SL20?
To verify the repair of components in your Upright Lifting Systems, conduct a full function test from both the platform and chassis controls. Confirm that all functions operate correctly and that the machine performs to the specified values.
General| Brand | Upright |
|---|---|
| Model | SL20 Series |
| Category | Lifting Systems |
| Language | English |
Outlines critical safety guidelines for using the aerial work platform.
Details daily inspection steps before operating the machine.
Explains how to operate the platform, including extension, travel, steering, and elevation.
Instructions for safely transporting the work platform by forklift or truck.
Provides a detailed checklist for regular machine inspection and service.
Details procedures for setting hydraulic pressures for various valves.
Guides users through identifying and resolving malfunctions.
Details LED fault codes and corrective actions for the motor controller.
A guide for troubleshooting electrical system issues using schematics.
A guide for troubleshooting hydraulic system issues using schematics.
