16 “Translation of the original instruction”
3.1 Regular Maintenance Procedures
Maintenance Symbol Legend:
Note: This manual uses the following
symbols to help express the relevant
meaning in the instructions. When the
maintenance program appears in front
of one or more symbols, the meaning of
the expression is as follows.
Indicates that the tool is required to
execute this program.
Indicates that the execution of this
program requires new parts.
Indicating that the engine is
overheating and needs to be in cooled.
Indicates that the engine needs to be in
a heated state.
Indicates that this program requires the
attention of authorised service
personnel.
Pre-delivery preparation report
The pre-delivery preparation report
contains a checklist of each type of
periodic inspection. Copy the
preparation report before delivery for
inspection. Save the completed form as
needed.
Maintenance schedule
According to the timetable, there are
five types of maintenance checks that
must be carried out. Daily, quarterly, six
monthly,Yearly and every two years.
Periodic maintenance procedures
section and maintenance inspection
reports are divided into five subsections,
A, B, C, D and E. Please follow the table
below to determine the program
combination for performing periodic
checks.
Check Check table
Every day or every 8 hours A
Every quarter or every 250 hours A+B
Every six months or every 500 hours A+B+C
Every year or every 1000 hours A+B+C+D
Every two years or every 2000 hours A+B+C+D+E
Maintenance Check Report
The maintenance check report contains a list of check items for each type of periodic
inspection.
Copy and maintain check reports for inspection, save the completed forms at least 4
years or save it in accordance with employers, workplaces and government regulations
and requirements.
To Next Page
Loading...
Need help?
General
