EasyManuals Logo

Upright MX Series User Manual

Upright MX Series
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
49 Translation of the original instruction”
2-2
5.2.2 Method to Remove the Platform Extension
1.Lower the platform to the stowed position.
2.Use the lifting strap to support the platform extension.
3.Remove the captive screws as shown.
4.Slowly lift the extension platform and place it on a device that can be used as a support.
Warning! Risk of injury.
Be Careful when Remove the platform from the machine Do not stand under it and maintain its
balance using correct lifting procedurs.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Upright MX Series and is the answer not in the manual?

Upright MX Series Specifications

General IconGeneral
Lift Capacity500 lbs
Weight Capacity500 lbs
Platform Width30 in
Overall Width36 in
Overall Length8 ft
Stowed Length8 ft
Stowed Width36 in

Related product manuals