Upright X26 Ultra Narrow User Manual

Operator Manual
Guide de l’opérateur
Betriebsanleitung
X26 Ultra Narrow
SERIAL NO. 20000 to Current
WARNING
All personnel shall carefully read, understand and follow all safety rules,
operating instructions, and National Safety Instructions/Requirements
before operating or performing maintenance on any UpRight Aerial Work
Platform.
The first section of this Operator Manual is the English language version.
AVERTISSEMENT
Tout le personnel doit lire attentivement, bien comprendre et suivre toutes
les règles de sécurité, le mode d’emploi et les règles nationales de sécu-
rité avant d’entretenir ou d’utiliser une plate-forme élévatrice UpRight.
La deuxième section du guide de l’opérateur est la version française.
WARNUNG
Alle Bediener müssen die Sicherheitsregeln, Betriebsanleitungen sowie
geltenden Sicherheitsanweisungen/-anforderungen gründlich durchlesen,
verstehen und befolgen, bevor sie an irgendeiner UpRight-Hocharbeits-
bühne Wartungsarbeiten ausführen oder diese in Betrieb nehmen.
Der dritte Abschnitt dieser Betriebsanleitung ist deutschsprachig.
P/N 114100-020

Upright X26 Ultra Narrow Specifications

General

Brand	Upright
Model	X26 Ultra Narrow
Category	Lifting Systems
Language	English

Summary

Safety Rules

Electrocution Hazard

Warns of electrocution risk due to the machine not being insulated.

Tip Over Hazard

Advises against operating with the platform elevated on unstable surfaces.

Collision Hazard

Emphasizes checking for overhead obstructions before positioning.

Fall Hazard

Prohibits climbing on guardrails or midrails.

Special Limitations

Platform Capacity

Details maximum load, occupants, and side force limits for the platform.

Manual Force

Specifies the maximum allowable manual force per occupant and total.

Beaufort Scale

Lists wind speed ratings and corresponding ground conditions for safe operation.

Lift Overload Alarm

Explains the alarm function for exceeding platform load limits.

Controls and Indicators

Chassis Controls

Identifies and describes controls and indicators located on the machine's chassis.

Platform Controls

Details the controls and indicators found on the operator's platform.

Pre-Operation Safety Inspection

System Function Inspection

Operation

Platform Extension

Instructions for extending and retracting the work platform.

Travel With the Platform Lowered

Procedures for safely moving the machine with the platform lowered.

Steering

Guidance on operating the steering system for directional control.

Elevating the Platform

Steps for safely raising the work platform to the desired height.

Travel With Work Platform Elevated

Guidelines for moving the machine when the platform is raised.

Lowering the Platform

Procedure for safely descending the work platform.

Emergency Lowering

Instructions for manually lowering the platform in an emergency.

Guardrails

Information on lowering and raising guardrails for passage through doorways.

Parking Brake Release

Procedure for releasing the parking brake for towing or winching.

Transporting the Machine

Lifting By Crane

Safe methods for lifting the machine using a crane.

Moving By Forklift

Instructions for safely moving the machine with a forklift.

Driving or Winching onto a Truck or Trailer

Procedures for loading the machine onto a transport vehicle.

Maintenance

Blocking The Elevating Assembly

Procedure for safely blocking the elevating assembly before service.

Level Sensor

Description and testing procedure for the machine's level sensor.

Hydraulic Fluid

Instructions for checking and maintaining the hydraulic fluid level.

Battery Maintenance

Guidelines for inspecting and maintaining the machine's batteries.

Battery Charging

Procedure for safely charging the machine's batteries.

Daily Inspection and Maintenance Schedule

Daily Preventative Maintenance Check List

A checklist for daily inspections to ensure proper machine performance.

Labels

Specifications