27
3.7 GRID Mode
Return to the measurement
page and the grid data is reset.
1 2
43
Enter the measurement seng
screen and press the “Reset
grid” item.
Press “OK” Yes to reset the
grid data.
Press the “Sengs” buon at
the boom of the screen.
Reset the Grid data
28
3.8 COMPARE Mode
The Compare item allows you to compare two measurements
side by side. You can compare two consecuve measurements
or compare a measurement against historical data (SD card).
SPECTRUM
PPFD
SPECTRUM
PPFD
BASIC
When you press the COMPARE
icon (on Home Screen), the
COMPARE Menu will display,
which is similar to the Home
Screen. You can tap any of
the icons depending on what
type of data you want to
compare.
1.
The examples in the following pages only describe how to compare
data in the BASIC screens, - comparing SPECTRUM, PPFD, PPFD
SPECTRUM data are similar.
To Next Page
Loading...
Need help?
General
