UPRtek PG200N User Manual

03
1.
2.
If the system crashes, press the power key for 3 seconds to turn off
the system.
If the problem sll can’t be fixed, use a pen to press the reset key
to turn off the system.
1.3 Product Introduction
Measure key
Sensor cover
4.3" Touch panel
Power key
Dustproof cover
Type C USB port
Optical sensor
Power on LED
MicroSD card slot
Reset key
Tripod
screw hole
Safety lock
Screw hole
（
To fix sensor head
stand bracket
）
04
1.4 Annual Product Calibration
As the product is a high-precision instrument, please use it cauously. To
ensure the accuracy of measurements, annual calibraon is recommended.
Please consult the agent or the customer service department for the
calibraon service.
1.5 Product Notes and Precautions
PG200N Spectrometer is a high-precision instrument. Please unpack with care.
Any vibraon or collision may cause instrument damage. If the product doesn’t
work normally or needs repair, don’t aempt any repairs. All repairs must be
performed by the authorized customer service agent.
Most LCD screens have a very small and inconsequenal defecve pixel rate
(usually less than 0.1%). This results in occasional pinpoints of white or other
colors but will not affect the accuracy of measurements.
1.
2.
■
■
■
■
■
■
■
■
■
Do not disassemble or modify the baery.
Do not expose the baery to heat (fire) or water/moisture.
When disposing of used/old baeries, wrap with insulaon tape to shield the
baery from electrical contact with metallic objects, which might ignite a fire or
explosion.
If the unit is plugged into the power adapter and the baery seems to be
overheang, or if there is smoke or peculiar odors emanang from the unit,
unplug immediately to avoid the possibility of fire.
Do not touch the cables if there is heat emanang from or near the cables as
melted or deformed cables could expose wiring and result in burns or electric
shock.
Do not use cloth or anything to wrap or cover the equipment while charging – this
could cause the unit to overheat, melng the casing or causing fire.
If the unit is accidently immersed in water, or if moisture has seeped inside, or
metal objects have dropped into the casing, immediately remove the baery to
avoid fire or electric shock.
Do not operate or store the baery in high-temperature environments. Thisi will
cause baery leakage and/or shorten the life of the baery.
Do not use paint thinner, benzene, or other organic solvents to clean the
equipment. This may damage the exterior finish or touch screen and may even
ignite a fire.
Please read the following precauons to avoid fire, excessive heat, chemical leakage
and explosion :
Precautions / Warnings

UPRtek PG200N Specifications

General

Brand	UPRtek
Model	PG200N
Category	Measuring Instruments
Language	English