UPRtek PG200N User Manual

35
4.1 Measurement Settings
In mode of “BASIC”, “SPECTRUM”, “PPFD”, “PPFD SPECTRUM”,
“CIE”, “GRID”, “COMPARE” you can press the “ ” seng
buon at the boom of the screen to perform detailed sengs.
Next
page
Back to
measurement page
Previous
page
36
About auto save:
1.
2.
Measurements are auto saved (Excel + JPG) in case this operaon
is set on. In case there is no SD card inserted when measurement
is running, this product prompts warning messages while keep on
measuring.
Measurements are saved only by clicking Save icon in case this
operaon is set off.
4.1 Measurement Settings
■
Keyboard
■
Save format
■
Auto save
You may opt to save
measurement data of
Excel file only or both
Excel and JPG files.
This opon is turned on can
be file naming when you
saving measured data.
Opt to select auto save
measurements or not.
■
Decimal speparator
■
Reset grid
■
Compare mode
This funcon will only be
displayed under GRID mode.
Select dot/comma to set
the decimal separator of
the measurement data.
This funcon will only be
displayed under COMPARE
mode.

UPRtek PG200N Specifications

General

Brand	UPRtek
Model	PG200N
Category	Measuring Instruments
Language	English