URIT 12 - Saving Test Results

Step 3: The minute will now flash. Press the
▲ or ▼ key to enter the minute. Press the
SET key to confirm.
Step 4: The first date selection will flash (m-
m or dd). Press the ▲ or ▼ key to enter
the first date selection. Press the SET key
to confirm.
Step 5: The second date selection will flash
(dd or mm). Press the ▲ or ▼ key to enter
the second date selection. Press the SET
key to confirm.
Step 6: Turn the meter off to confirm the
entering time and date.
Note: Once confirmed, the reporting un-
it will be changed for all stored test results.
Once selection of meter settings has
been completed, replace the strip holder
onto meter.
5. Saving Test Results
URIT-12 Hemoglobin Meter automatic-
ally stores 250 test results with a date and