finger to the test strip.
Note: This product is used for test-
ing human blood, user must prevent again-
st possible blood infection.
l A drop of blood (refer to the instru-
ction of Strips for detail)
l Do not use strip to touch blood,
test strip must be fixed on the meter. Apply
only the hanging blood to the test spot.
l Do not touch directly the test spot
membrane by finger.
l Do not apply superfluous blood;
the volume just covering the spot complete-
ly is enough.
l Do not apply blood on the spot ob-
taining blood repetitiously. Each strip is us-
ed for one test.
9. Read Result
The blood sample will spread and the
meter will automatically begin the test. Dur-
ing the test, do not disturb or move the met-
To Next Page
Loading...