with the notched end in first and the hole fa-
cing up. The notched end on the top of the
strip should no longer be visible when the
test strip is inserted correctly and fully.
6. Prepare the Meter for Sample Applica-
tion
The meter will automatically perform a
background blank reading. It will display a
flashing prompt to indicate that it is ready to
test a sample. The meter will allow 2 minut-
es for application of the blood sample.
7. Perform a Finger stick
Incise the underside of the fingertip. A-
void “Milking”. Apply light pressure to obtain
one drop of blood.
8. Apply Blood Sample to the Test Strip
Immediately apply a drop of blood to
the test strip by touching the hanging blood
drop to the test spot, ensure the blood drop
is large enough to completely cover the test
spot. A capillary transfer pipe may also be
used to transfer the blood sample from the
To Next Page
Loading...