to scroll through test results.
Step 3: Turn meter off to exit this function.
7. Deleting Test Results
Test results could be deleted by follow-
ing two methods: deleting the recent results
by CLE or deleting all results by CLA.
User could turn the meter off to stop
deleting test results before MEM displays.
Step 1: Lift the strip holder, turn the meter
on. Wait until the meter displays the Lot Co-
de, time and date.
Step 2: Press SET key twice, CLE displays.
Delete the recent results:
Step 3: Continue pressing SET key till CLE
flashes. Release SET key, the last result
will display. To delete this result, keep hold-
ing SET key and the result will flash and
then be deleted.
Delete all results:
Step4: Press SET key one more time, CLA
will display. Hold pressing SET key, CLA
flashes, Release SET key, ALL will display.
To Next Page
Loading...