EasyManua.ls Logo

US Robotics MAXg - Industry Canada (IC) Compliance

US Robotics MAXg
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Wireless MAXg Access Point User Guide
UL Listing/CUL Listing:
This information technology equipment is UL Listed and C-UL Listed for both the US and
Canadian markets respectively for the uses described in the User Guide. Use this product
only with UL Listed Information Technology Equipment (ITE).
This product is intended to be supplied by a UL Listed Direct Plug-in Power Unit rated 15
VDC, 1200 mA maximum.
For Canadian Users
Industry Canada (IC)
This equipment complies with RSS-210 of the Industry Canada Rules.
Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause
undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be
operated indoors and away from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
This device has been designed to operate with an antenna having a maximum gain of 2
dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry
Canada. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the Equivalent Isotropic Radiated Power (EIRP) is not more than
that required for successful communication.
file:///G|/CSO/T-Writer%20Repository/Networking/5455...0MAXg%20CR%20AP/Regulatory%20Preview/regulatory.html (3 of 7)4/24/2007 5:15:19 PM

Other manuals for US Robotics MAXg

Related product manuals