Wireless MAXg Access Point:
User Guide
Product Specifications
● AP Management through standard Web browsers
● Roaming capability
● Dynamic IP Address assignment via DHCP or Static IP address assignment through
the Web User Interface
● AP firmware upgrades available through the Web User Interface
● One RJ-45, 10/100 Mbps auto-sensing and auto-switching Ethernet LAN port
● Complies with IEEE 802.11g 54 Mbps wireless radio standard
● Security Features:
❍ WPA and WPA2 (Wi-Fi Protected Access) in Access Point mode
❍ 64/128-bit WEP (Wired Equivalent Privacy) data encryption with Open/
Shared Key
❍ Full Support for 802.11g Open and Shared key Authentication
❍ Ability to disable SSID Broadcast
❍ MAC address filtering
Acknowledgements
This product includes software developed by MDC and its licensors. This product includes
software developed by the OpenSSL Project for use in the OpenSSL Toolkit (
http://www.
openssl.org/). This product includes cryptographic software written by Eric Young
(
eay@cryptsoft.com). This product includes software written by Tim Hudson
(
tjh@cryptsoft.com).
© 2007 U.S. Robotics Corporation
file:///G|/CSO/T-Writer%20Repository/Networking/5455%20MAXg%20CR%20AP/Regulatory%20Preview/features.html4/24/2007 5:15:19 PM
To Next Page
Loading...
