To Next PageTo Next Page
Need help?Do you have a question about the US Robotics MAXg and is the answer not in the manual?
Shows the front view of the access point and its indicators.
Lists key features and technical specifications of the access point.
Outlines general terms, customer obligations, and service procedures for the product warranty.
Details limitations on the warranty, including third-party software and damage exclusions.
States conformity with FCC specifications, radiation exposure, and interference rules.
Details compliance with Industry Canada rules and antenna requirements.
Declaration of conformity with European standards and country-specific regulations.
Lists regulatory channel frequencies and operating channels for different regions.
Information on EU health protection and detachable antenna requirements.
Details the initial physical connections required for the access point.
Guides the user on initiating and performing the software setup wizard.
Guides the user through the initial configuration steps of the access point.
Instructions for configuring web browsers to properly display configuration pages.
Details how to access the access point's configuration interface via a web browser.
Manual steps to find the access point's IP address if detection fails.
Provides a reference to the different configuration pages and their functions.
How to change the user name and password for accessing configuration pages.
Enables wireless security features and recommends specific methods like WPA2/WPA.
Allows control over which devices can connect based on their MAC addresses.
Configuration of the wireless network name (SSID) and broadcast options.
Configuration for Wireless Distribution System (WDS) to bridge networks.
Enables Quality of Service (QoS) for multimedia applications.
Advanced wireless settings for transmission parameters like multicast rate and power level.
Configuration of the access point's IP address as dynamic or static.
Instructions on how to restart the access point and update its firmware.
Saves current configuration to a file and restores settings from a backup.
Resets the access point to its original factory default state.
General steps to diagnose and resolve common issues with the access point.
Step-by-step guide to diagnose network connectivity using ping commands.
Verifies indicator lights and network connections for troubleshooting.
Step-by-step guide to reset the access point to factory default settings.
Explains how to use the access point with devices that lack a DHCP server.
General| Security | WEP, WPA, WPA2 |
|---|---|
| Frequency Band | 2.4 GHz |
| Standards | 802.11g |
| Interface | Ethernet |
| Ports | 1 x 10/100M RJ45 |
