5. Click the LAN Settings button.
6. Clear all the check boxes and click OK.
7. Click OK again.
Netscape Navigator 8.x users:
1. Click Tools > Options > General.
2. Click the Connection Settings button.
3. Select Direct connection to the Internet, then click OK.
Logging In to the Configuration Pages
If you know the IP address of the access point, simply type it in your Web browser's
location or address line and press ENTER. If you do not know the IP address of the access
point, follow one of the procedures below to find it:
Using the Detection Utility(Windows Users Only)
1. Windows Vista or XP: Click Windows Start > All Programs > U.S. Robotics
Wireless MAXg Device Detection Utility.
All Other Windows Operating Systems: Click Windows Start > Programs > U.
S. Robotics Wireless MAXg Device Detection Utility.
The detection utility displays its welcome screen:
file:///G|/CSO/T-Writer%20Repository/Networking/5455%20MAXg%20CR%20AP/Regulatory%20Preview/config.html (2 of 5)4/24/2007 5:15:44 PM
To Next Page
Loading...
