2. Find the list of clients associated with the networking device.
3. On the client list, find the LAN MAC address of the access point.
4. Make a note the IP address associated with the LAN MAC address of the access
point.
Configuration Page Reference
The configuration pages are divided into the functional areas shown on its tabs and listed
below; for the description of a page, click one of the following links:
● Status
● Log
● Security
● Wireless
● LAN
● Device
© 2007 U.S. Robotics Corporation
file:///G|/CSO/T-Writer%20Repository/Networking/5455%20MAXg%20CR%20AP/Regulatory%20Preview/config.html (5 of 5)4/24/2007 5:15:44 PM
To Next Page
Loading...
