Wireless MAXg Access Point:
User Guide
My wireless unicast connection is very slow while another
client is using the access point for a multicast stream, such as
videoconferencing or Internet radio.
Set the multicast rate to 2 and try your unicast connection. If your connection improves,
continue increasing the multicast rate until you find the speed that provides the best
combination of connections for unicast and multicast clients. In a wireless network with
both 802.11b and 802.11g clients connected to the access point, you can increase the
multicast rate up to 9. In a wireless network with only 802.11g clients connected to the
access point, you can increase the multicast rate up to 54.
Return to Troubleshooting page
© 2007 U.S. Robotics Corporation
file:///G|/CSO/T-Writer%20Repository/Networking/5455%20MAXg%20CR%20AP/Regulatory%20Preview/trouble_unicast.html4/24/2007 5:15:57 PM
To Next Page
Loading...
