Wireless MAXg Access Point: User
Guide
Troubleshooting ping procedure
If at any time during the ping procedure you do not receive a return message for a successful
ping, the address that you are pinging has been changed and is causing a conflict or is no longer
available.
Note: Linux users can perform steps 3 through 7 after opening a terminal.
1. Open a command prompt as follows:
Windows Vista:
A. Click Windows Start.
B. In the Search box, type Command Prompt and press ENTER.
C. In the result list, double-click Command Prompt.
All other Windows operating systems:
A. Click Windows Start > Run.
B. In the Run dialog box:
Windows XP, 2000, and NT: Type cmd and click OK.
Windows Me, 98, and 95: Type command and click OK.
2. Type Ping 127.0.0.1. This is your local host address and this will ensure that the TCP/IP
file:///G|/CSO/T-Writer%20Repository/Networking/5455...AXg%20CR%20AP/Regulatory%20Preview/trouble_ping.html (1 of 5)4/24/2007 5:15:57 PM
To Next Page
Loading...
