Page 33
LPX SEED TREATER
General Panel Descriptions
The LPX Treater Main Panel is an enclosure that is attached to the side of the
treater and contains the electrical components required to actuate the seed treater.
This includes the VFDs for the seed wheel and atomizer. Power for the treater is
supplied here. Power to this panel is hard wired.
The Automated Main Control Panel is a plug connected enclosure that contains
the PLC (Programmable Logic Controller) as well as the HMI (Human Machine
Interface) touch screen. The operator is able to control the entire system through
the HMI. AUTOMATED TREATERS ONLY.
The Main Control Panel Remote Panel is an OPTIONAL plug connected enclosure
that is connected to the Main Treater Panel with a CAT5 Ethernet cable and can
be located up to 50 feet from the Treater Main Panel. These panels are serialized
to the treater they are connected to.
LPX Manual Treater Remote HMI Panel (see page 117).
LPX Automated Treater Remote HMI Panel (see page 118).
To Next Page
