UseTECH FlowTimer+ - 7 Operation and Function; Operating Conditions; Normal Operation; Restarting the System

Operation and Function
03/19 FlowTimer+ Hub Set 17
7 Operation and Function
7.1 Operating conditions
7.1.1 Normal operation
An operation of FlowTimer+ Protect is not necessary, because an
alarm as well as its resetting is done automatically by the upstream
FlowTimer+ systems.
7.1.2 Restarting the system
 Unplug the AC adapter (1) from the wall outlet or disconnect the
power supply.
 wait ten seconds
 Restore power supply
7.2 Status display
Green
(duration)
There's no alarm pending.
Red (duration)
An alarm of a FlowTimer+ has triggered a group alarm
(see also chapter 9.2.1).