Intended Use
03/19 FlowTimer+ Hub Set 7
3.1 Non-approved use
Unapproved use in the sense of a foreseeable misuse shall be
deemed to be improper use:
The I/O sockets of the FlowTimer+ Hub are only suitable for the
connection of FlowTimer+ products. No telephones, ISDN, other
devices or adapters may be connected.
The FlowTimer+ Hub may only be operated with the
components in the set or other FlowTimer+ products, unless
explicitly stated otherwise! If components of other manufacturers
are used, usetech GmbH is not liable for damages and the
warranty also expires.
The USB A output socket serves only as a charging socket for a
smartphone.
To Next Page
Loading...
Need help?
General