EasyManuals Logo
Home>USR IOT>Server>USR-N580

USR IOT USR-N580 User Manual

USR IOT USR-N580
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
USR-N580 User Manual technical support:h.usriot.com
Jinan USR IOT Technology Limited
14
www.usriot.com
3.2.2 Network Settings
The device server must be assigned a unique IP address that is valid for your network. Both fixed and dynamic
IP addresses are supported.
Static IP address
To assign a fixed IP address, the IP Type must be set to Static IP. You also need to modify the Static IP address,
Submask, Gateway and DNS parameters. Make sure that the IP address is different from other network
devices in the LAN.
DHCP
Instead of assigning N580 device’s IP address, you will need to configure the device to get its IP address from
the appropriate server. Set the IP Type to DHCP, then the IP address and other parameters will be assigned
automatically. In this mode, cannot directly connect the device to the computer.
If the device has been configured correctly, you should be able to ping its IP address form the PC.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the USR IOT USR-N580 and is the answer not in the manual?

USR IOT USR-N580 Specifications

General IconGeneral
BrandUSR IOT
ModelUSR-N580
CategoryServer
LanguageEnglish

Related product manuals