USR IOT USR-N580 - Miscellaneous and Factory Settings

USR-N580 User Manual technical support:h.usriot.com
Jinan USR IOT Technology Limited
16
www.usriot.com
3.2.4 Miscellaneous Settings
You can change some basic parameters like Module name, Username and Password in this interface.
3.2.5 Restore to Factory Default Settings
There are three ways to restore the device to factory settings.
1. There is a “Reload” button in the device. After power on, press and hold the “Reload” button for 3~15s to
restore the N580 device to factory settings.