USR IOT USR-N580 - Connecting Hardware and Power

USR-N580 User Manual technical support:h.usriot.com
Jinan USR IOT Technology Limited
9
www.usriot.com
2.2.2 Indicators
Indicator
Description
Power
Indicates power. It is on when power is supplied
Work
Indicates working status. It twinkles when N580 works well. If it is on or off
for a period, N580 works improperly, you should disconnect the power and
restart.
TX n
It twinkles when port n sends data.
RX n
It twinkles when port n receive data.
Status
Error indicator.
Link
Always on when establish a socket connection.
2.3 Connecting Hardware
2.3.1 Serial Connecting
Connect a serial data cable between the N580 and the serial device. And the pin wiring should be: A to A, B to
B, GND to GND. Please set the serial parameters of N580 to be consistent with RS485 serial device. Serial
parameters of N580 default to 115200, NONE, 8, 1.
2.3.2 Network Connecting
Connect one of the Ethernet cable to the N580’s 10/100M Ethernet port and the other end of the cable to the
Ethernet network. The green indicator light will always be on and the orange light will be twinkling.