3. Insert four anchors.
CAUTION: Be sure the anchors are seated flush with the concrete surface.
CAUTION: Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts.
4. Insert wall plate using four lag bolts . Tighten the lag bolts only until they are pulled firmly
against the wall plate.
Please contact us and message to us to have these
additional pieces shipped directly to you.
Concrete Wall Anchor
(Not included)
12
3 4
06
01
!
!
No!
06
01
UP
To Next Page
Loading...
