Loading Paper
2-2 OPERATION GUIDE
3
Adjust the paper width by pressing in on the
release buttons and sliding the guides to fit
the width of the paper.
4
Place the paper in the cassette, with side to
be printed downward, so that the leading
edge is aligned against the paper stopper.
Be sure that none of the paper gets caught
on the overhanging tabs, that there is no
gap between the paper and the stopper or
guides and that it does not exceed the level
of the lines located on the width guides.
5
Push the cassette securely all the way back
into the machine until it stops.
6
Register the paper size loaded in the cassette. Refer to the Advanced Operation
Guide.
2GM_UTAX_ENG_OG.book 2 ページ ２００５年３月４日 金曜日 午後９時４５分
To Next Page
Loading...
Need help?
General
