Basic Operation
OPERATION GUIDE 4-5
Variable Zoom
Perform the following procedure to make settings for the Variable Zoom mode.
1
Press Copy.
2
Press left Select.
3
Press S or T to select Zoom Entry.
4
Press Enter.
5
Press S or T, as appropriate, to change the displayed zoom ratio to the desired
ratio.
6
Press Enter. The message display shows Completed and returns to the basic
screen. The new zoom ratio is registered.
To start copying, place the original on the platen and press Start.
2GM_UTAX_ENG_OG.book 5 ページ ２００５年３月４日 金曜日 午後９時４５分
To Next Page
Loading...
