Maintenance
OPERATION GUIDE 5-3
6
Shake the new toner container horizontally
5 or 6 times to distributed the toner inside.
7
Remove the orange protective seal.
8
Align the knob on the left side of the
container with the groove in the process unit
and insert it. Push on the PUSH HERE
marks until the container clicks into place.
9
Push the lock lever back into its locked
position (away from you).
Clean the charge and registration roller.
Refer to Cleaning the Charger and the
Registration Roller on page 5-4.
2GM_UTAX_ENG_OG.book 3 ページ ２００５年３月４日 金曜日 午後９時４５分
To Next Page
Loading...
Need help?
General
