8-14
Default Setting (System Menu)
Paper Size and Media Type Setup for Multi Purpose Tray
Select size and media type for multi purpose tray. Set up frequently-used size and media type before use.
The available paper sizes and media types are shown in the table below.
NOTE: To change to a media type other than Plain, refer to Media Type Set on page 8-16
Use the procedure below to select the paper size and media type for manual paper feed.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the U or V key to select [Orig./Paper Set.].
4 Press the OK key. The Orig./Paper Set. menu appears.
5 Press the U or V key to select [MP Tray Set.].
Item Description
Paper
Size
Letter, Legal, Statement, Executive, Oficio II, A4, A5, A6,
B5, B6, Folio, 216 × 340mm, 16K, ISO B5, Envelope #10,
Envelope #9, Envelope #6, Envelope Monarch, Envelope
DL, Envelope C5, Hagaki, Oufuku Hagaki, Youkei 4,
Youkei 2, Custom*
* Refer to Adding a Custom Size and Media Type for Paper to Print on
page 8-10 for selecting Custom Paper Size.
Media
Type
Plain (105 g/m
2
or less), Transparency, Rough, Vellum
(64 g/m
2
or less), Labels, Recycled, Preprinted**, Bond,
Cardstock, Color, Prepunched**, Letterhead**, Envelope,
Thick (106 g/m
2
and more), High Quality, Custom 1-8**
** Refer to Media Type Set on page 8-16 for selecting Custom 1- 8 from
Media Type.
To print on preprinted or prepunched paper or on letterhead, refer to
Special Paper Action on page 8-22.
To Next Page
Loading...
