EasyManuals Logo

Utax CD 5130 User Manual

Utax CD 5130
438 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #235 background imageLoading...
Page #235 background image
8
8-43
Default Setting (System Menu)
Function Defaults
Defaults are the values automatically set after the warm-up is completed or the Reset key is pressed.
Set the defaults for available settings such as copying and sending. Setting the frequently-used values as defaults
makes subsequent jobs easier.
Color Selection
Select the default color mode setting. The available default settings are shown below.
Use the procedure below to select the default color mode setting.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the U or V key to select [Function Default].
4 Press the OK key. The Function Default menu appears.
5 Press the U or V key to select [Color Selection].
6 Press the OK key. Color Selection appears.
Color mode Description
Full Color Scan document in full color.
Grayscale Scan document in grayscale for smoother
and finer finish.
Black & White Scan document in black and white.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Utax CD 5130 and is the answer not in the manual?

Utax CD 5130 Specifications

General IconGeneral
BrandUtax
ModelCD 5130
CategoryAll in One Printer
LanguageEnglish

Related product manuals