Utax CD 5130 - Send as E-Mail

3
3-19
Basic Operation
Send as E-mail
Sends a scanned original image as an E-mail attachment.
NOTE:
• You must have a network environment in which this machine can connect to a mail server. It is recommended
that the machine be used in an environment in which it can connect to the mail server at any time over a LAN.
• Access the Embedded Web Server beforehand and specify the settings required for sending e-mail. For details,
see Embedded Web Server (Settings for E-mail) on page 2-26.
• Refer to Character Entry Method on Appendix-5 for details on entering characters.
1 Press the Send key.
Displays the screen for sending.
2 Place the originals on the platen or in the document
processor.
NOTE: For loading instructions, refer to Loading
Originals on page 2-52.
3 Press the U or V key to select [E-mail].
4 Press the OK key. Address Entry appears.
5 Enter the destination e-mail address.
NOTE: Destination can be specified using the Address
Book or the One-touch keys. Refer to Specifying
Destination on page 3-25.
Send to: a b
*********************
2 G Folder(SMB)
3 H Folder(FTP)
1 p E-mail
Address Entry: B b
*
ABC
[ Text ]