Utax CD 5130 User Manual

8
8-135
Default Setting (System Menu)
Network Security
The network security functions can be set up to protect printer operation and the print data.
The following network security settings are available.
• IPSec Setting …8-135
• SSL Setting …8-136
• SNMPv3 Setting …8-144
IPSec Setting
Make this setting when you use IPSec. The default setting is Off and that of Rule Setting is also Off.
Use the procedure below to make the setting.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [System], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2 The System menu appears.
3 Press the U or V key to select [Network Setting].
4 Press the OK key. The Network Setting menu appears.
5 Press the U or V key to select [IPSec].
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Setting
Network Setting: a b
4 WSD-SCAN
5 WSD-PRINT
*********************
[ Exit ]
6 IPSec

Utax CD 5130 Specifications

General

Brand	Utax
Model	CD 5130
Category	All in One Printer
Language	English