Utax P-C2660 MFP

Default Setting (System Menu)
8-68
TonerAlert Level
Set the amount of remaining toner to alert low toner.
The procedure for setting the TonerAlert Level is explained below.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the  or  key to select [TonerAlert Level].
4 Press the OK key. TonerAlert Level appears.
5 Press the  or  key to select [Off] or [On].
6 If [On] is selected and the OK key is pressed, the
Toner Level screen appears.
If [Off] is selected and the OK key is pressed,
proceed to step 8.
7 Press the  or  key or the numeric keys to set
the level at which an alert will be displayed.
8 Press the OK key. Completed. is displayed and the
screen returns to the Common Settings menu.
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
[ Exit ]
6 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
TonerAlert Level: a b
*********************
2 On
1 *Off
Toner Level: M b
(5 - 100)
******** %
5