Utax P-C2660 MFP User Manual

Preparation before Use
2-5
2
Connecting Cables
Follow the steps below to connect cables to the machine.
1 If the machine power is on, press the Energy
Saver key on the operation panel and make sure
that the message displayed and memory light are
off. Then, press the main power switch to turn off
the power.
2 Connect the machine to the PC or your network
device. When using the network interface, remove
the cap.
3 Remove the Power Cord Connector Cover.
On
Off
1 2

Utax P-C2660 MFP Specifications

General

Brand	Utax
Model	P-C2660 MFP
Category	All in One Printer
Language	English