Utax P-C2660 MFP

Management
11-24
Applying Restriction
Restriction can be applied in two modes as follows:
Use the procedure below to select a restriction method.
1 Follow steps 1 to 7 of Adding an Account on page
11-18.
2 In Account. List, press the  or  key to select the
account to which you want to set restriction of use,
and then press the OK key.
3 Press the  or  key to select the item to be
restricted and then press [Edit] (the Right Select
key).
When selecting [Split] in Copy/Print Count, screen
changes as shown in the left.
4 Press the  or  key to select the desired
restriction method and then press the OK key.
Item Description
Off No restriction given
Counter Limit Restricts the print counter in one-page increments
up to 9,999,999 copies.
Reject Usage Restriction is applied.
Account. List: a b
k UI R&D DEP.
*********************
k ###########
[ Menu ]
k Osaka GUI Design
Detail: C b
Print Restrict.: 4/6
Total
Off
[ Edit ]
Detail: C b
Print Restrict.: 4/7
Copier
Off
[ Edit ]
Print Restrict.: a b
*********************
2 Counter Limit
3 Reject Usage
1 *Off