Utax P-C2660 MFP

Management
11-26
3 Press the OK key. The Job Account. Set. menu
appears.
4 Press the  or  key to select [Default Setting].
5 Press the OK key. The Default Setting menu
appears.
6 Press the  or  key to select [Apply Limit].
7 Press the OK key. Apply Limit appears.
8 Press the  or  key to select [Immediately],
[Subsequently] or [Alert Only].
9 Press the OK key.
Completed. is displayed and the screen returns to
the Default Setting menu.
Job Account.Set.: a b
4 Total Accounting
*********************
6 Account. List
[ Exit ]
5 Each Job Account
Default Setting: a b
*********************
2 Copy/Print Count
3 Counter Limit
[ Exit ]
1 Apply Limit
Apply Limit: a b
1 Immediately
*********************
3 Alert Only
2 *Subsequently