Preparation before Use
2-35
2
2 Select the same name as this machine from WIA Drivers, and press Properties.
NOTE: If Windows Security and User Account Control are displayed, no trouble should be found with
operation after installing the driver and software we have provided. Continue installation.
3 When the machine is connected with the USB cable, click the Settings tab and select Image
Compression and the Compression Level. If user login administration is invalid, go to Step 5.
When the machine is connected with the network cable, go to Step 4.
4 Select the checkbox beside Authentication, enter Login User Name (up to 64 characters) and Password
(up to 64 characters) and then click OK.
NOTE: When the machine's IP address is unknown, contact Administrator.
5 Click Close.
The machine is registered to the PC.
To Next Page
Loading...
Need help?
General
