5-16
Operation on the Machine > Sending
Destination Search
The destination can be searched by name.
1 [Menu] > [ā²] [ļ±] key > [Search (Name)] > [OK] key
2 Enter characters to search using the numeric keys.
3 Select the [OK] key.
The searched destination is displayed.
3
Select the [OK] key.
To send to multiple destinations, repeat steps 1 to 3. You can send to as many as 100
destinations at once.
Destinations can be changed later.
For details on entering characters, refer to the following:
Character Entry Method (page 11-11)
Checking and Editing Destinations (page 5-21)
To Next Page
Loading...
Need help?
General
