5-17
Operation on the Machine > Sending
Choosing from the One Touch Key
Select the destination using the One Touch Keys.
In the basic screen for sending, select the One Touch Keys where the destination is registered.
When selecting One Touch Key numbers 12 to 22, the One touch Key needs to be selected after switching on the [Shift
Lock] indicator by selecting the [Shift Lock] key.
Destinations can be changed later.
Checking and Editing Destinations (page 5-21)
Entering an E-mail Address
Enter the desired E-mail address.
1
In the basic screen for sending, select [ā²] [ā¼] key > [E-mail] >
[OK] key
2
Enter destination E-mail address.
3
Select the [OK] key.
To send to multiple destinations, select the [Confirm/Add Destination] key. You can send to
as many as 100 destinations at once.
Destinations can be changed later.
This procedure assumes that One Touch Keys have already been registered.
For more information on adding One Touch keys, refer to the following:
Adding a Destination on One Touch Key (One Touch Key) (page 3-29)
To send an E-mail, configure the environment settings necessary.
E-mail Settings (page 2-44)
For details on entering characters, refer to the following:
Character Entry Method (page 11-11)
Checking and Editing Destinations (page 5-21)
To Next Page
Loading...
Need help?
General
