5-31
Operation on the Machine > Sending
WSD scan
1
Select [Send] on the Home screen.
2
Place the originals.
3
Display the screen.
Select [WSD Scan].
4
Scan the originals.
Procedure using this machine
1 [From Operation Panel] > [Next]
2 Select the destination computer > [OK]
Select [Reload] to reload the computer list.
You can view information on the selected computer by selecting [ ].
3 Press the [Start] key.
Sending begins and the software installed on the computer is activated.
Procedure from Your Computer
1 [From Computer] > [Next]
2 Use the software installed on the computer to send the images.
Loading Originals (page 5-2)
To Next Page
Loading...
