9-26
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Simple Login Settings
The simple login function allows users to log in simply by selecting a user name. Users must be registered in advance to
use this functionality.
Simple Login
Select whether or not simple login is enabled.
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 [User Login Setting] > [Simple Login Settings] > [Simple Login]
2
Select [On] or [Off].
Simple Login Setup
Register users to use simple login. You can add up to 20 users.
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 [User Login Setting] > [Simple Login Settings] > [Simple Login Setup]
• For user registration, refer to the following:
Adding a User (Local User List) (page 9-5)
• To use Simple Login, User Login Administration must be enabled in "Enabling User Login Administration".
Enabling User Login Administration (page 9-3)
• When the guest authorization setting is enabled, the Simple Login screen is not displayed.
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 3500
Login Password: 3500
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 3500
Login Password: 3500
To Next Page
Loading...
Need help?
General
