10-2
Troubleshooting > Regular Maintenance
Regular Maintenance
Cleaning
Clean the machine regularly to ensure optimum printing quality.
Glass Platen
Wipe the inside of the document processor and the glass platen with a soft cloth dampened with alcohol or mild
detergent.
Slit Glass
When using the document processor, clean the slit glass surface and the reading guide with the dry cloth.
For safety, always unplug the power cord before cleaning the machine.
Do not use thinner or other organic solvents.
Do not use water, soap or solvents for cleaning.
Dirt on the slit glass or the reading guide may cause black streaks to appear in the output.
To Next Page
Loading...
Need help?
General
