8-25
Setup and Registration (System Menu) > System Menu
Auto cassette Change Select the following actions when the paper runs out in the paper source while printing.
Value: Off, On
When selecting [Off], the machine displays "Add the following paper in cassette #." (# is a
cassette number) or "Add the following paper in the multi purpose tray.", and stops printing.
Load the paper according to the paper source displayed to resume printing.
To print from the other paper cassette, select [Paper Selection]. Select the desired paper
source.
When selecting [On], the machine continues printing automatically when the other cassette
contains the same paper as the currently-used cassette.
Gloss Mode Gloss Mode increases the effect of glossiness in printing. However, printing takes longer time.
Value: Off, On
Gloss Mode is not available when [Labels] or [Transparency] is selected as the paper
type setting.
Cassette/MP Tray Settings (page 8-8)
Depending on the paper used, printing in gloss mode may cause curl in paper.
To reduce curl, try using thicker paper.
Item Description
To Next Page
Loading...
