8-38
Setup and Registration (System Menu) > System Menu
Item Description
Sleep Rules (models for
Europe)
Select whether to use the Sleep mode for the following functions individually:
•Network
• Card Reader
*1
•FAX
*2
•Application
Value: Off, On
If the sleep condition is not turned off, the ID card cannot be recognized.
Sleep Level (models except for
Europe)
Select the sleep level.
Set the Energy Saver mode to reduce power consumption even more than Quick Recovery
mode.
Value: Quick Recovery, Energy Saver
This function will not be displayed when the optional Network Interface Kit is installed.
Sleep Rules Select whether to use the Energy Saver mode for the following functions individually:
•Network
• Card Reader
*1
•FAX
*2
•Application
Value: Off, On
When the machine has entered sleep mode with Energy Saver setting, the ID card cannot be
recognized.
Sleep Timer Set amount of time before entering Sleep.
Value
For Europe: 1 to 120 minutes (1 minute increments)
Except for Europe: 1 to 240 minutes (1 minute increments)
*1 Displayed when the optional Card Authentication Kit is activated.
*2 Only on products with the fax function installed.
To Next Page
Loading...
Need help?
General
