11-7
Appendix > Optional Equipment
4 Insert the SD/SDHC memory card into the SD/SDHC memory card slot.
5 Replace the covers and close the rear cover.
6 Insert the power cord into the socket and turn on the power switch.
7 Format the SD/SDHC memory card from the operation panel.
For the procedure for formatting, refer to the following:
(8) MS-5100 "Manual stapler"
It can staple the originals or the printouts. The number of sheets that can be stapled together is 20 sheets (80 g/m
2
).
(9) Data Security Kit(E) "Data Security Kit"
The Data Security Kit overwrites all unnecessary data in the storage area so that it cannot be retrieved. The Data
Security Kit encrypts data before storing it in the SSD. It guarantees higher security because no data cannot be decoded
by ordinary output or operations.
(10) UG-33 "ThinPrint Option"
This application allows print data to be printed directly without a print driver.
Format SD Card (page 8-18)
To Next Page
Loading...
Need help?
General
